14 Volume of a Cube or Rectangular Tank
https://media.bccampus.ca/id/0_jfiymwln?width=608&height=402&playerId=23449753
Click play on the following audio player to listen along as you read this section
If you were asked to describe the volume of an object, what would that look like? How would you describe the units your calculation would be in?
This chapter deals with the calculation of volume and the units used when calculating volume.
In the last chapter we dealt with perimeter, which is a linear measurement. As we found out, perimeter is one dimensional and essentially takes on the characteristics of a line. A good example of perimeter would be if you walked around the outside of a soccer field. You would have walked the perimeter of the field.
Then we took a look at area, which is a two-dimensional measurement. A good example of that is a table top. If you were to take a paint brush and repaint the top of the table, you would be painting the area of the table top.
When dealing with volume, we are adding one more dimension, and this ends up making volume a three-dimensional measurement. A good example of a three dimensional object would be the planet Earth.
Here is another visual representation of each of the three. Each line represents a plane.
Now let’s revisit units. When we deal with a linear measurements, we deal with units as they are. By that I mean we would get the answer in metres, feet, inches, centimetres and so on.
When we deal with area, we keep dealing with units such as metres, but they are squared to indicate that they have two dimensions. For instance, an apartment might have an area of 1200 feet squared or 1200 ft². The squaring of the feet indicates two dimensions, such as a width AND length.
But now we add one more dimension into the mix. Not only might we have a length and a width, but we might also have a depth. This leads us to ask, “What would the units be in this situation?“
Well if we had metres as our unit then the answer would be metres cubed. If we were to write it similar to how we wrote down area, it would look like this:
[latex]\Large{\text{metre}}^{3} \qquad \text{or} \qquad {\text{m}}^{3}[/latex]
The “3” in this case represents three dimensions and is responsible for the term “cubed” when we sound it out. Now we are ready to go on and find out the formula for the volume of specific objects.
Volume of a Cube
When the word “cube” is stated, we can think of a square but just with another dimension added. Each dimension on a square is identical and a cube follows that same logic.
If you add a third dimension, you get all possible dimensions being the same. Take a look at one of the most famous cubes in the world:
In order to find the volume of the cube, we need to multiply three sides together. More specifically, we would look at multiplying the length, the width, and the height. Because all three sides are the same, the formula ends up looking like the following:
[latex]\Large \text{volume of a cube} = \text{side}