2.6 Circuit Laws: KCL and KVL
We now introduce two laws for analyzing circuits that we will be using for the duration of this text.
Kirchoff’s Current Law. We previously defined a node in a circuit as a point where two or more circuit elements are connected together. Kirchoff’s current law (typically written “KCL”) specifies that the the sum of all currents entering a node must equal the sum of all currents exiting a node.
Put another way, the net current entering (or exiting) any circuit node must equal zero. This law amounts to a statement of conservation of charge: if the net current entering any node were non-zero, there would be a net buildup of charge at a point in a circuit over time. The analogy with a hydraulic piping system is helpful: if a series of pipes come together at a junction, the total fluid flow, in gallons per minute or cubic meters per second, entering the junction must equal the total fluid flow exiting the junction, otherwise there would be a buildup of fluid over time. Figure 2.47 is redrawn below to show all currents entering the circuit node with no currents exiting the node. KCL then specifies that the total current entering the node is . Note that negative signs are used for and to represent the currents of Figure 2.47 as entering the node when we draw Figure 2.48.
Implication for circuit elements connected in series. We previously defined series circuit elements as elements connected end-to-end, with no additional path for current to flow. Implicit in this definition is that the currents in series-connected elements are identical.
This can be shown via straightforward application of Kirchoff’s Current Law, where, for the single node in Figure 2.49, by KCL. This can be readily extended to more than two circuit elements combined in series, allowing us to state: all circuit elements connected in series have the same value of current.
Examples
Determine the value of current in the circuit shown:
Solution: letting the sum of currents entering the node equal the sum of currents exiting the node, we have: or A.
Determine the value of the current in the circuit shown:
Solution: proceeding as in the previous example: or A.
Note that in these two examples and in Figures 2.50 and 2.51, we use the variables , and whereas we used variables , , and in figures 2.47 and 2.48. This is keeping with our convention of using upper case variables to represent DC values, as in these two examples, while using lower case variables to represent the more general case of AC and mixed AC+DC values.
Kirchoff’s Voltage Law. We previously defined a loop in a circuit as a closed path starting at a node, proceeding through circuit elements, ultimately returning to the starting node. Kirchoff’s voltage law (KVL) stipulates that the sum of voltages encountered traversing any closed circuit loop must equal zero. This law amounts to a statement of conservation of energy. The circuit shown in figure 2.52 has four series-connected elements and four nodes,