Chapter 15. Alternating-Current Circuits
15.1 AC Sources
Learning Objectives
By the end of the section, you will be able to:
- Explain the differences between direct current (dc) and alternating current (ac)
- Define characteristic features of alternating current and voltage, such as the amplitude or peak and the frequency
Most examples dealt with so far in this book, particularly those using batteries, have constant-voltage sources. Thus, once the current is established, it is constant. Direct current (dc) is the flow of electric charge in only one direction. It is the steady state of a constant-voltage circuit.
Most well-known applications, however, use a time-varying voltage source. Alternating current (ac) is the flow of electric charge that periodically reverses direction. An ac is produced by an alternating emf, which is generated in a power plant, as described in Induced Electric Fields. If the ac source varies periodically, particularly sinusoidally, the circuit is known as an ac circuit. Examples include the commercial and residential power that serves so many of our needs.
The ac voltages and frequencies commonly used in businesses and homes vary around the world. In a typical house, the potential difference between the two sides of an electrical outlet alternates sinusoidally with a frequency of 60 or 50 Hz and an amplitude of 156 or 311 V, depending on whether you live in the United States or Europe, respectively. Most people know the potential difference for electrical outlets is 120 V or 220 V in the US or Europe, but as explained later in the chapter, these voltages are not the peak values given here but rather are related to the common voltages we see in our electrical outlets. Figure 15.2 shows graphs of voltage and current versus time for typical dc and ac power in the United States.
Suppose we hook up a resistor to an ac voltage source and determine how the voltage and current vary in time across the resistor. Figure 15.3 shows a schematic of a simple circuit with an ac voltage source. The voltage fluctuates sinusoidally with time at a fixed frequency, as shown, on either the battery terminals or the resistor. Therefore, the ac voltage, or the “voltage at a plug,” can be given by
where v is the voltage at time t, [latex]{V}_{0}[/latex] is the peak voltage, and [latex]\text{ω}[/latex] is the angular frequency in radians per second. For a typical house in the United States, [latex]{V}_{0}=156\phantom{\rule{0.2em}{0ex}}\text{V}[/latex] and [latex]\text{ω}=120\pi \phantom{\rule{0.2em}{0ex}}\text{rad/s}[/latex], whereas in Europe, [latex]{V}_{0}=311\phantom{\rule{0.2em}{0ex}}\text{V}[/latex] and [latex]\text{ω}=100\pi \phantom{\rule{0.2em}{0ex}}\text{rad/s}\text{.}[/latex]
For this simple resistance circuit, [latex]I=V/R[/latex], so the ac current, meaning the current that fluctuates sinusoidally with time at a fixed frequency, is
where i is the current at time t and [latex]{I}_{0}[/latex] is the peak current and is equal to [latex]