Chapter 14. Inductance
14.6 RLC Series Circuits
Learning Objectives
By the end of this section, you will be able to:
- Determine the angular frequency of oscillation for a resistor, inductor, capacitor [latex]\left(RLC\right)[/latex] series circuit
- Relate the [latex]RLC[/latex] circuit to a damped spring oscillation
When the switch is closed in the RLC circuit of Figure 14.17(a), the capacitor begins to discharge and electromagnetic energy is dissipated by the resistor at a rate [latex]{i}^{2}R[/latex]. With U given by Equation 14.19, we have
where i and q are time-dependent functions. This reduces to
This equation is analogous to
which is the equation of motion for a damped mass-spring system (you first encountered this equation in Oscillations). As we saw in that chapter, it can be shown that the solution to this differential equation takes three forms, depending on whether the angular frequency of the undamped spring is greater than, equal to, or less than b/2m. Therefore, the result can be underdamped [latex]\left(\sqrt{k\text{/}m} > b\text{/}2m\right)[/latex], critically damped [latex]\left(\sqrt{k\text{/}m}=b\text{/}2m\right)[/latex], or overdamped [latex]\left(\sqrt{k\text{/}m} < b\text{/}2m\right)[/latex]. By analogy, the solution q(t) to the RLC differential equation has the same feature. Here we look only at the case of under-damping. By replacing m by L, b by R, k by 1/C, and x by q in Equation 14.44, and assuming [latex]\sqrt{1\text{/}LC}>R\text{/}2L[/latex], we obtain
where the angular frequency of the oscillations is given by
This underdamped solution is shown in Equation 14.17(b). Notice that the amplitude of the oscillations decreases as energy is dissipated in the resistor. Equation 14.45 can be confirmed experimentally by measuring the voltage across the capacitor as a function of time. This voltage, multiplied by the capacitance of the capacitor, then gives q(t).
Try an interactive circuit construction kit that allows you to graph current and voltage as a function of time. You can add inductors and capacitors to work with any combination of R, L, and C circuits with both dc and ac sources.
Try out a circuit-based java applet website that has many problems with both dc and ac sources that will help you practice circuit problems.
Check Your Understanding
In an RLC circuit, [latex]L=5.0\phantom{\rule{0.2em}{0ex}}\text{mH},C=6.0\mu \text{F},\phantom{\rule{0.2em}{0ex}}\text{and}\phantom{\rule{0.2em}{0ex}}R=200\phantom{\rule{0.2em}{0ex}}\text{Ω}.[/latex] (a) Is the circuit underdamped, critically damped, or overdamped? (b) If the circuit starts oscillating with a charge of [latex]3.0\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{-3}\phantom{\rule{0.2em}{0ex}}\text{C}[/latex] on the capacitor, how much energy has been dissipated in the resistor by the time the oscillations cease?
Show Solution
a. overdamped; b. 0.75 J
Summary
- The underdamped solution for the capacitor charge in an RLC circuit is
[latex]q\left(t\right