Chapter 10 Rotational Motion and Angular Momentum
10.3 Dynamics of Rotational Motion: Rotational Inertia
Summary
- Understand the relationship between force, mass and acceleration.
- Study the turning effect of force.
- Study the analogy between force and torque, mass and moment of inertia, and linear acceleration and angular acceleration.
If you have ever spun a bike wheel or pushed a merry-go-round, you know that force is needed to change angular velocity as seen in Figure 1. In fact, your intuition is reliable in predicting many of the factors that are involved. For example, we know that a door opens slowly if we push too close to its hinges. Furthermore, we know that the more massive the door, the more slowly it opens. The first example implies that the farther the force is applied from the pivot, the greater the angular acceleration; another implication is that angular acceleration is inversely proportional to mass. These relationships should seem very similar to the familiar relationships among force, mass, and acceleration embodied in Newton’s second law of motion. There are, in fact, precise rotational analogs to both force and mass.
To develop the precise relationship among force, mass, radius, and angular acceleration, consider what happens if we exert a force [latex]{F}[/latex] on a point mass [latex]{m}[/latex] that is at a distance [latex]{r}[/latex] from a pivot point, as shown in Figure 2. Because the force is perpendicular to [latex]{r},[/latex] an acceleration [latex]{a=\frac{F}{m}}[/latex] is obtained in the direction of [latex]{F}.[/latex] We can rearrange this equation such that [latex]{F=ma}[/latex] and then look for ways to relate this expression to expressions for rotational quantities. We note that [latex]{a=r\omega},[/latex] and we substitute this expression into [latex]{F=ma},[/latex] yielding
Recall that torque is the turning effectiveness of a force. In this case, because [latex]\textbf{F}[/latex] is perpendicular to [latex]{r},[/latex] torque is simply [latex]{\tau=Fr}.[/latex] So, if we multiply both sides of the equation above by [latex]{r},[/latex] we get torque on the left-hand side. That is,
or
This last equation is the rotational analog of Newton’s second law ( [latex]{F=ma}[/latex] ), where torque is analogous to force, angular acceleration is analogous to translational acceleration, and [latex]{mr^2}[/latex] is analogous to mass (or inertia). The quantity [latex]{mr^2}[/latex] is called the rotational inertia or moment of inertia of a point mass [latex]{m}[/latex] a distance [latex]{r}[/latex] from the center of rotation.
MAKING CONNECTIONS: ROTATIONAL MOTION DYNAMICS
Dynamics for rotational motion is completely analogous to linear or translational dynamics. Dynamics is concerned with force and mass and their effects on motion. For rotational motion, we will find direct analogs to force and mass that behave just as we would expect from our earlier experiences.
Rotational Inertia and Moment of Inertia
Before we