Grid Systems and Coordinates
What is a grid system?
A grid is a regular pattern made of squares formed by two sets of lines that intersect at right angles. Grid systems are used to precisely identify locations on a map. The two types of grid systems we will cover in this course are:
- Geographic, where locations are specified using degrees and minutes of latitude and longitude.
- Universal Transverse Mercator (UTM), where locations are specified in metres using an easting and northing.
Depending on your settings in Google Earth Pro, you might be using the geographic grid system (latitude and longitude) OR the Universal Transverse Mercator grid system (UTM). If you are not sure which grid system you are using, return to the Options menu to check.
Latitude and longitude
The geographic grid system is made up of meridians of longitude and parallels of latitude. Figures T8 and T9 illustrate the geographic grid system in Canada.
Coordinates that describe an exact location on the surface of Earth are represented in degrees, minutes and seconds of latitude and longitude. Depending on the accuracy required in locating a point on a map, degrees (°) may be subdivided into 60 subdivisions known as minutes (‘) and minutes may be subdivided into 60 subdivisions known as seconds (“). The line of 0° longitude is the prime meridian located in Greenwich, England, and longitude increases from 0° to 180° as you move east or west away from the prime meridian. The line of 0° latitude is the equator, and latitude increases from 0° to 90° as you move north or south towards the poles.
When using the geographic grid system, one must specify whether coordinates are north (N) or south (S) of the equator, and east (E) or west (W) of the prime meridian. For anywhere in Canada, latitude will always be north of the equator and longitude will always be west of the prime meridian, e.g., 51°02’39” N 114°03’47” W. Notice that latitude is listed first, followed by longitude. Together, these coordinates describe an exact location.
Universal Transverse Mercator (UTM)
In this grid system designed by the military, Earth’s surface is divided into 60 north-south zones designated by a number and letter, each covering 6° of longitude in width (Figure T10). Inside each zone, coordinates are measured in metres north and east. The city of Calgary is actually divided into two UTM zones: zone 11 U and zone 12 U (Figure T11).
A UTM coordinate always begins with the zone, which in the case for most of Calgary is 11 U. The easting is always given first, followed by the northing. For example, 11 U 705863 m E 5658841 m N are the approximate coordinates for the Calgary Tower.
In Figure T12, a point is located using UTM coordinates 11 U 708400 m E 5659200 m N, meaning that the location is known to within a 100 m by 100 m square.
Universal Transverse Mercator (UTM) grid references
Instead of reporting the full UTM coordinates, an abbreviated 6-digit grid reference can be reported to give a location to