12.1 AC Sources
LEARNING OBJECTIVES
- Explain the differences between direct current (dc) and alternating current (ac)
- Define characteristic features of alternating current and voltage, such as the amplitude or peak and the frequency
Most examples dealt with so far in this book, particularly those using batteries, have constant-voltage sources. Thus, once the current is established, it is constant. Direct current (dc) is the flow of electric charge in only one direction. It is the steady state of a constant-voltage circuit.
Most well-known applications, however, use a time-varying voltage source. Alternating current (ac) is the flow of electric charge that periodically reverses direction. An ac is produced by an alternating emf, which is generated in a power plant, as described in Induced Electric Fields. If the ac source varies periodically, particularly sinusoidally, the circuit is known as an ac circuit. Examples include the commercial and residential power that serves so many of our needs.
The ac voltages and frequencies commonly used in businesses and homes vary around the world. In a typical house, the potential difference between the two sides of an electrical outlet alternates sinusoidally with a frequency of or and an amplitude of or depending on whether you live in North America or Europe, respectively. Most people know the potential difference for electrical outlets is or in North America or Europe, but as explained later in the chapter, these voltages are not the peak values given here but rather are related to the common voltages we see in our electrical outlets. Figure 12.1.1 shows graphs of voltage and current versus time for typical dc and ac power in North America.
(Figure 12.1.1)
Suppose we hook up a resistor to an ac voltage source and determine how the voltage and current vary in time across the resistor. Figure 12.1.2 shows a schematic of a simple circuit with an ac voltage source. The voltage fluctuates sinusoidally with time at a fixed frequency, as shown, on either the battery terminals or the resistor. Therefore, the ac voltage, or the “voltage at a plug,” can be given by
where is the voltage at time is the peak voltage, and is the angular frequency in radians per second. For a typical house in North America, and whereas in Europe, and
For this simple resistance circuit, so the ac current, meaning the current that fluctuates sinusoidally with time at a fixed frequency, is
where is the current at time and is the peak current and is equal to For this example, the voltage and current are said to be in phase, meaning that their sinusoidal functional forms have peaks, troughs, and nodes in the same place. They oscillate in sync with each other, as shown in Figure 12.1.1(b). In these equations, and throughout this chapter, we use lowercase letters (such as ) to indicate instantaneous values and capital letters (such as ) to indicate maximum, or peak, values.
(Figure 12.1.2)
Current in the resistor alternates back and forth ju