11.2 Grinding Wheels
Tim A. Bacon
The grinding wheel is the cutting tool used in precision grinding operations. These wheels are similar to the ones used for offhand grinding, covered in the chapter on Hand Tools, and Benchwork. They are made of abrasive grain held together with a bonding material. Offhand grinding wheels are typically straight in shape. The motion of the machine can be accurately controlled. This allows a selection from a variety of wheel shapes that will best fit the application.
Shape
Types of wheels seen above; Straight (Type 1), Cylinder (Type 2), Tapered (Type 4), Recessed One Side (Type 5), Recessed Two Side (Type 7), Flaring Cup (Type 11), Dish (Type 12), and Saucer (Type 13).
The feature that is being ground will help identify the shape of the grinding wheel that is needed. A small part with a groove would require a narrow, straight wheel. Dressing, or modifying a tool would use a cup style wheel.
A straight wheel, as used on offhand grinders, is the most common wheel for a precision grinder. A wheel may also have features that are relieved or recessed. These wheels will minimize contact between the sides of the wheel and the workpiece. Cup, saucer, and dish shaped wheels are usually used for tool grinding, or modification.
The face of the wheel is the surface that is designed for grinding. The face is usually defined as the periphery, or outside circumference, of the wheel. In some applications, with a vertical grinder, the face of the wheel is the flat surface. When grinding two surfaces that are perpendicular to each other, the side of the wheel may be engaged at the same time as the face. This may be done to produce features such as a shoulder, slot, or groove.
Abrasive
The abrasive material that grinding wheels are typically made of is one of these three combinations; Aluminum oxide, Ceramic aluminum oxide, or Silicon carbide. Aluminum oxide, and ceramic aluminum oxide wheels are identified by the letter A. The silicon carbide wheel will have the letter C on it.
Aluminum Oxide is used for steels. Ceramic Aluminum Oxide is for grinding materials containing iron. Silicon Carbide wheels are referred to as Green wheels. They are for grinding carbide.
It is important to only grind material appropriate for the specific abrasive wheel being used. For example, grinding aluminum on a wheel designed for steel will plug up the wheel, and build up heat. Excessive heat will cause the wheel to explode.
Grit
The grit, or grain size of the abrasive type is descriptive of the material that makes up the wheel. The lower the number, the coarser the wheel. Higher numbers indicate a finer grain pattern. Coarse wheels with a large grain structure will remove material quickly, and create a rough surface finish. A finer wheel will remove material more slowly, and produce a smoother surface finish. Coarse wheels will cut soft metals better because the larger grains can penetrate the workpiece more easily.
When grinding harder metals, a fine