We have an ARM9 using the 3.2 kernel -- everything seems to work fine. Recently I was asked to add some code to add a 50ms pulse on some GPIO lines at startup. The pulse code is fine; I can see the lines go down and up, as expected. What does not work the way I expected is the udelay() function. Reading the docs makes me think the units are in microseconds, but as measured in the logic analyzer it was way too short. So I finally added this code to get 50ms.

// wait 50ms to be sure PCIE reset takes
for (i=0;i<6100;i++) // measured on logic analyzer - seems wrong to me!!
{
   __udelay(2000); // 2000 is max
}

I don't like it, but it works fine. There are some odd constants and instructions in the udelay code. Can someone enlighten me as to how this is supposed to work? This code is called after all the clocks are initialized, so everything else seems ok.

linux linux-kernel embedded
Edit
Report