Edit Question - KnowledgeHub

Title Body

I am having some trouble reading some data from a serial port I opened the following way. I've used this instance of code plenty of times and all worked fine, but now, for some reason that I cant figure out, I am completely unable to read anything from the serial port. I am able to write and all is correctly received on the other end, but the replies (which are correctly sent) are never received (No, the cables are all ok ;) ) The code I used to open the serial port is the following: fd = open("/dev/ttyUSB0", O_RDWR | O_NONBLOCK | O_NOCTTY); if (fd == -1) { Aviso("Unable to open port"); return (fd); } else { //Get the current options for the port... bzero(&options, sizeof(options)); /* clear struct for new port settings */ tcgetattr(fd, &options); /*-- Set baud rate -------------------------------------------------------*/ if (cfsetispeed(&options, SerialBaudInterp(BaudRate))==-1) perror("On cfsetispeed:"); if (cfsetospeed(&options, SerialBaudInterp(BaudRate))==-1) perror("On cfsetospeed:"); //Enable the receiver and set local mode... options.c_cflag |= (CLOCAL | CREAD); options.c_cflag &= ~PARENB; /* Parity disabled */ options.c_cflag &= ~CSTOPB; options.c_cflag &= ~CSIZE; /* Mask the character size bits */ options.c_cflag |= SerialDataBitsInterp(8); /* CS8 - Selects 8 data bits */ options.c_cflag &= ~CRTSCTS; // disable hardware flow control options.c_iflag &= ~(IXON | IXOFF | IXANY); // disable XON XOFF (for transmit and receive) options.c_cflag |= CRTSCTS; /* enable hardware flow control */ options.c_cc[VMIN] = 0; //min carachters to be read options.c_cc[VTIME] = 0; //Time to wait for data (tenths of seconds) //Set the new options for the port... tcflush(fd, TCIFLUSH);

Tags (comma-separated) Cancel