How to Make a Diamond Kite
Cut two wooden dowels to the desired length.. Notch the ends of the dowels.. Form a cross with the dowels.
Steps
Cut two wooden dowels to the desired length.
Cut two wooden dowels to the desired length.
Notch the ends of the dowels.
Notch the ends of the dowels.
Form a cross with the dowels.
Form a cross with the dowels.
Tie the dowels together.
Tie the dowels together.
Wrap string around the bottom of the vertical dowel.
Wrap string around the bottom of the vertical dowel.
Wrap the string around the frame through the notches.
Wrap the string around the frame through the notches.
Trace around the frame on a large sheet of paper.
Trace around the frame on a large sheet of paper.
Cut out the kite shape.
Cut out the kite shape.
Fold the edges of the paper over the string and tape it in place.
Fold the edges of the paper over the string and tape it in place.
Tie a string around the cross section.
Tie a string around the cross section.
Make a mark for the top point of the kite.
Make a mark for the top point of the kite.
Measure a point for the side corners of the kite.
Measure a point for the side corners of the kite.
Measure and mark the bottom point.
Measure and mark the bottom point.
Connect the dots with a marker.
Connect the dots with a marker.
Cut the shape out.
Cut the shape out.
Cut wooden dowels or bamboo sticks to 40 inches (100 cm).
Cut wooden dowels or bamboo sticks to 40 inches (100 cm).
Form a cross with the sticks and tie them at the intersection.
Form a cross with the sticks and tie them at the intersection.
Attach the frame to the plastic body of the kite.
Attach the frame to the plastic body of the kite.
Tie a 2 foot long strip of the plastic to the bottom of the kite.
Tie a 2 foot long strip of the plastic to the bottom of the kite.
Attach the remaining kite string to the frame of the kite.
Attach the remaining kite string to the frame of the kite.
Comments (0)
No comments yet. Be the first to share your thoughts!