Wet a piece of 80-grit sandpaper and lay it down on a work surface.. Place the cut edge of the glass down onto the sandpaper.. Move the glass in a circular motion for 5 minutes to smooth the edge.
Wet a piece of 80-grit sandpaper and lay it down on a work surface.
Place the cut edge of the glass down onto the sandpaper.
Move the glass in a circular motion for 5 minutes to smooth the edge.
Sand the inner and outer corners of the glass edge by hand.
Repeat this process with increasingly finer grits of sandpaper.
Attach a sanding bit to a Dremel tool or power drill.
Hold the tool with your dominant hand and the glass with the other hand.
Run the sanding bit against the inner edge of the glass.
Move the sanding bit to the top and outer corner of the glass edge.
Repeat this process with fine-grit sandpaper to polish the edge.
Place a piece of float glass over foam rubber on your work surface.
Add water and a coarse grit of silicon carbide powder to the glass.
Place the sharp edge of the glass against the plate glass.
Circle your hand and the bottle around the glass for 30-60 seconds.
Wipe off the glass with a towel and use sandpaper to smooth the inside.
Comments (0)
No comments yet. Be the first to share your thoughts!