How to Do a Burnout on a Motorcycle
Stand with both feet as flat on the ground as possible.. Start the motorcycle and keep it in the neutral gear.. Pull the clutch lever all the way in.
Steps
1
Stand with both feet as flat on the ground as possible.
Stand with both feet as flat on the ground as possible.
2
Start the motorcycle and keep it in the neutral gear.
Start the motorcycle and keep it in the neutral gear.
3
Pull the clutch lever all the way in.
Pull the clutch lever all the way in.
4
Hold the front brake with the middle finger of your right hand.
Hold the front brake with the middle finger of your right hand.
5
Put the motorcycle into first gear.
Put the motorcycle into first gear.
6
Rev up the engine close to the red line on the gauge.
Rev up the engine close to the red line on the gauge.
7
Lean forward slightly to shift all of the weight off of the rear tire.
Lean forward slightly to shift all of the weight off of the rear tire.
8
Let go of the clutch to perform a burnout.
Let go of the clutch to perform a burnout.
9
Reengage the clutch and release the throttle to end the burnout.
Reengage the clutch and release the throttle to end the burnout.
Comments (0)
No comments yet. Be the first to share your thoughts!