How to Make Paracord Ranger Beads
Fold a length of paracord into a loop.. Make a second, smaller loop to the right of the first loop.. Weave the end of the cord through the two loops.
Steps
1
Fold a length of paracord into a loop.
Fold a length of paracord into a loop.
2
Make a second, smaller loop to the right of the first loop.
Make a second, smaller loop to the right of the first loop.
3
Weave the end of the cord through the two loops.
Weave the end of the cord through the two loops.
4
Push the end of the cord back down through the third loop.
Push the end of the cord back down through the third loop.
5
Thread the cord up through the center hole.
Thread the cord up through the center hole.
6
Fold a second cord in half.
Fold a second cord in half.
7
Slide the second cord through the ring you just made.
Slide the second cord through the ring you just made.
8
Tighten the bead.
Tighten the bead.
9
Cut the ends of the bead.
Cut the ends of the bead.
10
Seal the cut ends of the bead with heat.
Seal the cut ends of the bead with heat.
11
Make more beads.
Make more beads.
12
Tie a knot at both ends of the base cord.
Tie a knot at both ends of the base cord.
Comments (0)
No comments yet. Be the first to share your thoughts!