How to Bend Plywood
Create a form out of MDF (medium density fiberboard).. Clamp the plywood to the form using bar clamps.. Leave the plywood clamped to the form overnight.
Steps
1
Create a form out of MDF (medium density fiberboard).
Create a form out of MDF (medium density fiberboard).
2
Clamp the plywood to the form using bar clamps.
Clamp the plywood to the form using bar clamps.
3
Leave the plywood clamped to the form overnight.
Leave the plywood clamped to the form overnight.
4
Unclamp the plywood from the form.
Unclamp the plywood from the form.
5
Use your hands to test the bent plywood.
Use your hands to test the bent plywood.
6
Get a ratchet strap with S-hooks.
Get a ratchet strap with S-hooks.
7
Hook the S-hooks to opposite ends of the plywood.
Hook the S-hooks to opposite ends of the plywood.
8
Use the ratchet to tighten the strap until the plywood is bent how you want it.
Use the ratchet to tighten the strap until the plywood is bent how you want it.
9
Leave the ratchet strap on the plywood overnight.
Leave the ratchet strap on the plywood overnight.
10
Test the bent plywood.
Test the bent plywood.
Comments (0)
No comments yet. Be the first to share your thoughts!