Repair damaged spots using a concrete patching compound.. Polish the floor. Vacuum the floor to remove dust and debris.
Repair damaged spots using a concrete patching compound.
Polish the floor
Vacuum the floor to remove dust and debris.
Clean the floor with soapy water to eliminate any remaining dirt.
Consider etching the floor to help the stain adhere.
Tape off areas you don't want to come into contact with the stain.
Make sure your work area is as well-ventilated as possible.
Mix the stain with the recommended amount of water.
Start applying the stain at the back of the room.
Spray the stain onto the concrete surface using overlapping strokes.
Use a broom to spread the wet stain.
Allow the stain to dry for 3-4 hours.
Wet a small section of the stain to test the color if desired.
Apply additional coats as needed.
Let the stain dry for 12-24 hours.
Scrub the floor with a mild all-purpose cleaner to ensure that it's clean.
Roll the sealant onto the stained floor using a low-nap roller.
Allow the sealant to cure for 1-2 days before using the floor again.
Comments (0)
No comments yet. Be the first to share your thoughts!