How to Grout Wall Tile
Put on safety protection.. Tape plastic covers to surrounding walls and floors.. Remove tile spacers from in-between the tiles.
Steps
Put on safety protection.
Put on safety protection.
Tape plastic covers to surrounding walls and floors.
Tape plastic covers to surrounding walls and floors.
Remove tile spacers from in-between the tiles.
Remove tile spacers from in-between the tiles.
Mix your grout until it is smooth and consistent.
Mix your grout until it is smooth and consistent.
Mix your grout every 15 minutes.
Mix your grout every 15 minutes.
Pick a 3 ft × 3 ft (0.91 m × 0.91 m) section.
Pick a 3 ft × 3 ft (0.91 m × 0.91 m) section.
Spread grout over the tiles.
Spread grout over the tiles.
Float more grout in a diagonal fashion.
Float more grout in a diagonal fashion.
Hold the float at 90 degrees and remove excess grout.
Hold the float at 90 degrees and remove excess grout.
Use the rounded corner of your float to shape your grout joints.
Use the rounded corner of your float to shape your grout joints.
Fill a bucket with clean water.
Fill a bucket with clean water.
Use a sponge to wipe off excess grout.
Use a sponge to wipe off excess grout.
Lightly sponge the joints.
Lightly sponge the joints.
Buff the tile with a microfiber cloth or cotton towel.
Buff the tile with a microfiber cloth or cotton towel.
Caulk joints between tile and other surfaces.
Caulk joints between tile and other surfaces.
Shape the caulk.
Shape the caulk.
Comments (0)
No comments yet. Be the first to share your thoughts!