How to Make a Glue Gun
Cut apart a soda can to get a flat sheet.. Cut a rectangle out of the sheet.. Twist the rectangle into a cone.
Steps
1
Cut apart a soda can to get a flat sheet.
Cut apart a soda can to get a flat sheet.
2
Cut a rectangle out of the sheet.
Cut a rectangle out of the sheet.
3
Twist the rectangle into a cone.
Twist the rectangle into a cone.
4
Cut the side flap down.
Cut the side flap down.
5
Tape the cone together.
Tape the cone together.
6
Get a candle lighter.
Get a candle lighter.
7
Place the cone alongside the stick.
Place the cone alongside the stick.
8
Secure the cone with tape.
Secure the cone with tape.
9
Insert a hot glue stick into the cone.
Insert a hot glue stick into the cone.
10
Hold the lighter parallel to the table.
Hold the lighter parallel to the table.
11
Ignite the lighter and let the glue heat up.
Ignite the lighter and let the glue heat up.
12
Release the trigger.
Release the trigger.
13
Use the hot glue gun.
Use the hot glue gun.
Comments (0)
No comments yet. Be the first to share your thoughts!