How to Create a Metal Backsplash
Measure the area of your backsplash.. Determine the backsplash material and calculate the cost.. Gather your supplies for installation.
Steps
1
Measure the area of your backsplash.
Measure the area of your backsplash.
2
Determine the backsplash material and calculate the cost.
Determine the backsplash material and calculate the cost.
3
Gather your supplies for installation.
Gather your supplies for installation.
4
Ready the area for installation.
Ready the area for installation.
5
Check walls for unevenness.
Check walls for unevenness.
6
Do a trial run for your design.
Do a trial run for your design.
7
Prepare your adhesive.
Prepare your adhesive.
8
Apply your adhesive to the wall.
Apply your adhesive to the wall.
9
Attach the backsplash material to the wall.
Attach the backsplash material to the wall.
10
Prevent unevenness in the backsplash depth.
Prevent unevenness in the backsplash depth.
11
Remove the backsplash protective covering, if applicable.
Remove the backsplash protective covering, if applicable.
12
Adjust the backsplash by hand as necessary.
Adjust the backsplash by hand as necessary.
13
Brush off remaining adhesive, if necessary.
Brush off remaining adhesive, if necessary.
14
Mix and apply grout to the backsplash, if necessary.
Mix and apply grout to the backsplash, if necessary.
15
Clean any remaining cloudiness from the backsplash.
Clean any remaining cloudiness from the backsplash.
Comments (0)
No comments yet. Be the first to share your thoughts!