How to Finish Pine for Outdoor Use
Spread out a tarp in a well-ventilated area.. Seal the surface with diluted polyurethane.. Apply a coat of polyurethane over the sealant.
Steps
Spread out a tarp in a well-ventilated area.
Spread out a tarp in a well-ventilated area.
Seal the surface with diluted polyurethane.
Seal the surface with diluted polyurethane.
Apply a coat of polyurethane over the sealant.
Apply a coat of polyurethane over the sealant.
Add 2-3 more polyurethane coats.
Add 2-3 more polyurethane coats.
Shave off any bumps or uneven areas.
Shave off any bumps or uneven areas.
Brush on a final coat of polyurethane.
Brush on a final coat of polyurethane.
Reapply the finish every 2-3 years.
Reapply the finish every 2-3 years.
Set up a tarp in a spot with good air circulation.
Set up a tarp in a spot with good air circulation.
Choose a latex or oil-based paint.
Choose a latex or oil-based paint.
Sand the surface down with fine-grit sandpaper.
Sand the surface down with fine-grit sandpaper.
Spray a paint primer over the wood.
Spray a paint primer over the wood.
Apply 2-3 coats of paint.
Apply 2-3 coats of paint.
Use a paint sealant to preserve your finish.
Use a paint sealant to preserve your finish.
Reapply paint coats as needed.
Reapply paint coats as needed.
Apply epoxy in a well-ventilated room with a tarp underneath.
Apply epoxy in a well-ventilated room with a tarp underneath.
Apply a coat of epoxy with a putty knife.
Apply a coat of epoxy with a putty knife.
Wait for the epoxy to dry and check for uneven areas.
Wait for the epoxy to dry and check for uneven areas.
Apply at least 3 coats of epoxy finish.
Apply at least 3 coats of epoxy finish.
Set the epoxy aside to cure for 4-5 days.
Set the epoxy aside to cure for 4-5 days.
Apply a top coat of wood varnish over the epoxy.
Apply a top coat of wood varnish over the epoxy.
Comments (0)
No comments yet. Be the first to share your thoughts!