How to Restore Brick
Vacuum any dust and dirt.. Get the brick wet before using any cleaners.. Scrub the brick with a mixture of dish soap and table salt.
Steps
Vacuum any dust and dirt.
Vacuum any dust and dirt.
Get the brick wet before using any cleaners.
Get the brick wet before using any cleaners.
Scrub the brick with a mixture of dish soap and table salt.
Scrub the brick with a mixture of dish soap and table salt.
Use a sealant to keep the brick in good condition.
Use a sealant to keep the brick in good condition.
Vacuum and wet the brick before applying the cleaner.
Vacuum and wet the brick before applying the cleaner.
Cover the area surrounding the brick with a tarp.
Cover the area surrounding the brick with a tarp.
Wear safety goggles and rubber gloves while handling acid cleaners.
Wear safety goggles and rubber gloves while handling acid cleaners.
Mix the acid cleaner with water.
Mix the acid cleaner with water.
Apply the acid cleaner to the brick.
Apply the acid cleaner to the brick.
Wash away the acid and let the brick dry.
Wash away the acid and let the brick dry.
Use a hammer and chisel to chip away the old mortar.
Use a hammer and chisel to chip away the old mortar.
Soak the wall with water and let it sit overnight.
Soak the wall with water and let it sit overnight.
Mix a brick mortar batch.
Mix a brick mortar batch.
Insert the new mortar into the joints.
Insert the new mortar into the joints.
Chip away the old mortar with a chisel.
Chip away the old mortar with a chisel.
Pull out the loose brick.
Pull out the loose brick.
Scrub the brick with a wet bristle brush.
Scrub the brick with a wet bristle brush.
Mix a batch of brick mortar.
Mix a batch of brick mortar.
Apply the mortar to the dampened brick and cavity.
Apply the mortar to the dampened brick and cavity.
Re-set the brick into the cavity.
Re-set the brick into the cavity.
Let the mortar dry for 1-2 days.
Let the mortar dry for 1-2 days.
Comments (0)
No comments yet. Be the first to share your thoughts!