How to Clean Axis Pedals
Separate the slave pedal by removing the screws if it's a double pedal.. Lay the pedal over a clean towel or working surface.. Use a screwdriver to remove all of the fasteners, screws, and springs.
Steps
Separate the slave pedal by removing the screws if it's a double pedal.
Separate the slave pedal by removing the screws if it's a double pedal.
Lay the pedal over a clean towel or working surface.
Lay the pedal over a clean towel or working surface.
Use a screwdriver to remove all of the fasteners, screws, and springs.
Use a screwdriver to remove all of the fasteners, screws, and springs.
Wipe off any lubricant that's already on your pedals with a lint-free cloth.
Wipe off any lubricant that's already on your pedals with a lint-free cloth.
Insert the small applicator tube into the can of pedal lubricant.
Insert the small applicator tube into the can of pedal lubricant.
Spray the lubricant into the U-joint and any moving parts of the pedal.
Spray the lubricant into the U-joint and any moving parts of the pedal.
Apply a light coating of pedal lube to the fasteners and springs.
Apply a light coating of pedal lube to the fasteners and springs.
Wipe away the excess lubricant with a lint-free cloth.
Wipe away the excess lubricant with a lint-free cloth.
Put all of the screws, springs, and fasteners back into place.
Put all of the screws, springs, and fasteners back into place.
Reconnect the 2 sections if it's a double pedal.
Reconnect the 2 sections if it's a double pedal.
Comments (0)
No comments yet. Be the first to share your thoughts!