Measure the enclosure for the dishwasher.. Set a mat down to protect the floor during the installation.. Switch off the power and water lines before putting in the dishwasher.
Measure the enclosure for the dishwasher.
Set a mat down to protect the floor during the installation.
Switch off the power and water lines before putting in the dishwasher.
Assemble the proper tools for the job.
Unpack the dishwasher so it's ready to install.
Unscrew the junction box cover and install the strain relief.
Find the hot water line and connect it into the dishwasher.
Tape the power cables into place without plugging them in.
Level the dishwasher using a small wrench.
Attach the installation brackets to secure the dishwasher into place.
Drill a hole into the cabinet wall adjoining the enclosure.
Attach the drain hose to the main pipe beneath the sink.
Secure the drain hose into place with a hose clamp.
Plug in the proper wires into the junction box.
Check inside the dishwasher and remove any extra packaging.
Screw in the kick plate to the bottom of the appliance.
Switch on the power and test out the dishwasher.
Comments (0)
No comments yet. Be the first to share your thoughts!