How to Draw Blood from Hard to Hit Veins

Beginner 45 min 15 steps 8775 views Rating: 5.0/5 Published: 2026-05-28

Make sure your tourniquet has been applied properly.. Put a warm pack or water bottle over the area.. Use proper palpation techniques.

Start Playback
E
Author

Steps

1

Make sure your tourniquet has been applied properly.

Step 1

Make sure your tourniquet has been applied properly.

2

Put a warm pack or water bottle over the area.

Step 2

Put a warm pack or water bottle over the area.

3

Use proper palpation techniques.

Step 3

Use proper palpation techniques.

4

Tell the patient to relax.

Step 4

Tell the patient to relax.

5

Verify patient information.

Step 5

Verify patient information.

6

Locate the vein.

Step 6

Locate the vein.

7

Disinfect the area.

Step 7

Disinfect the area.

8

Perform the venipuncture.

Step 8

Perform the venipuncture.

9

Apply pressure to the puncture area for 5 minutes after the needle is out to sto

Step 9

Apply pressure to the puncture area for 5 minutes after the needle is out to stop the bleeding.

10

Dispose of the needle in a hard sided, biohazard container.

Step 10

Dispose of the needle in a hard sided, biohazard container.

11

Double check the labeling on the tube to make sure it is accurate.

Step 11

Double check the labeling on the tube to make sure it is accurate.

12

Look for another vein if the median cubital vein is not visible.

Step 12

Look for another vein if the median cubital vein is not visible.

13

Notice sites to avoid.

Step 13

Notice sites to avoid.

14

Correct improper needle placement.

Step 14

Correct improper needle placement.

15

Give up and have a colleague do the procedure if your second attempt fails.

Step 15

Give up and have a colleague do the procedure if your second attempt fails.

View as Slideshow

Rate This Guide

★ ★ ★ ★ ★ 5.0/5
3

Comments (0)

No comments yet. Be the first to share your thoughts!